EMC Consulting and Testing
We are not an accredited FCC certification lab. We are an independent RF and EMC consulting firm that tests, diagnoses, and fixes RF/EMC/RFI problems – before FCC certification, after a regulatory failure, or when you just need something to work.
With more than 30 years of combined experience, our designers provide EMC consulting, pre-compliance testing, and EMC troubleshooting for products facing electromagnetic compatibility (EMC) and regulatory compliance challenges.
We have a screen room, a lab, and a garage large enough to test a full vehicle. Our principal designer holds 10+ issued RF circuit and system design patents, and our team has been solving RF and EMC problems since 2006. If you have a problem and no clear path to solving it, that’s what we’re here for. We know that failing regulatory testing and EMC/RFI problems can delay product launch, increase redesign costs, and disrupt production timelines.
Not sure what to look for in an EMC consultant?
If your prototype or product is failing regulatory tests, we provide efficient RF and PCB-level mitigation strategies to help products pass radiated and conducted emissions testing. Our in-house screen room allows us to find and solve your existing RFI/EMI issues, or to pre-screen for possible regulatory failures before you even begin compliance testing. We will also follow your product through final certification at your preferred test lab, and fix problems as they arise.
Our expertise spans medical devices, avionics systems, satellite communications, automotive, consumer, utility, and other compliance-critical platforms.
Call us at (919) 374-0773 to get started.
Need to pass regulatory certification?
Failed compliance tests? Not sure if you will pass FCC certification?
Pre-compliance screening – before you book the test house
- Screen your device in our lab before committing to a test window
- Find and fix radiated and conducted emissions problems before FCC Part 15, CE/EN, MIL-STD-461, IEC 60601-1-2, DO-160, and other regulatory testing
- Fix the problem before you certify – not after you’ve burned a test window
Post-failure diagnosis and redesign
- Diagnose exactly why you failed
- RF circuit and PCB-level redesign, including schematic and layout reviews, to fix the root cause
- Re-screen in our lab before you go back to the test house
White-glove test house support
- We attend FCC Part 15 and many other types of certification testing with you and manage the process on-site
- Catch bad test setups before they affect your results
- Stop the clock if your device is defective by pre-screening in our lab
- Feedback throughout your test window – no surprises at the end
- Regulatory and type-approval support – including FCC certification, CE/EN conformity, and testing at accredited partner labs – from pre-compliance through final certification
Does your device have an RF/EMC problem?
No certification deadline. No formal spec. Just something that doesn’t work right.
- Self-interference and RFI debugging – your electronics are interfering with each other and you need to find the source
- ESD testing and debugging – test, diagnose, fix, repeat until it passes
- Testing to your customer’s internal or proprietary specifications
- “I don’t have a spec – my device just doesn’t work right” – a valid starting point we hear regularly
Do you need an independent lab to verify RF/EMC performance?
Your customer has their own specs. Your vendor built the hardware. You need someone independent to verify it actually works.
- Third-party RF performance testing against customer-defined specifications
- FCC Part 15 and Part 25 pre-compliance screening for satellite and all types of communications equipment
- Device-level RF/EMC performance verification – independent of the design house that built it
- Our credentials – we serve as a trusted outside test lab for various aerospace and satellite clients verifying vendor hardware
Have a product with an RFI/EMC issue or FCC certification problem?
Tell us what you’re working with – we’ll tell you how we’d approach it.